Charging Your Battery

How to Charge Your Battery

Charging Procedure: 

  1. Check that the battery switch is in the off position. If not, toggle to the off position. The battery can be charged both on and off the bike.

  2. Open the rubber cover on the charging port.

  3. Place the charger in a flat, secure place and plug the charger into the battery’s charging port, before plugging into the power out.

  4. Plug the charger into a power outlet (110/240 volt plug). Charging should initiate and will be indicated by the LED charge status light on the charger.

Flashing Red – Battery not charging

Red – Battery is connected and charging

Green – Charging cycle is complete

     5. Once fully charged, unplug the charger from the outlet, then the charging port: Indicated light turning will turn green when fully charged.

Always charge your battery in temperatures between 50 °F - 77 °F (10 °C - 25 °C) and ensure the battery and charger are not damaged before initiating charge. If you notice anything unusual while charging, please discontinue charging and contact Fission Cycle’s Support Team for help.

Follow the steps below to charge any of our Fission Cycles Bike batteries.

 If you are not confident in your ability to successfully and safely perform all steps, we recommend having the work performed or checked by a local, certified, and reputable bike mechanic.